Capture Amp 5/4 Front Zip Wetsuit Kids

Texte du fabricant, en anglais

• Recycled Max flex

  Max_Flex is our most flexible outer lining and is made with 90% recycled nylon. Its unique rhombus structure is designed to deliver outstanding stretch and freedom of movement. The material helps disperse water through small channels, allowing the wetsuit to dry faster between sessions.

• Plasma Plush 2.0

  Our premium lining provides both heat retention and optimal stretch. The high-pile fabric effectively traps air, ensuring cozy warmth and insulation, while the vertically aligned channel structure swiftly transports moisture away, leaving your suit dry after your break between sessions.

• Eco Stretch

  Eco_Stretch is an outer lining made with GRS-certified recycled nylon. Combining flexibility and comfort, it delivers the stretch needed for unrestricted movement on the water.

• Hot Stuff 2.0

  The Hot_Stuff 2.0 comes with a plushier feel due to larger loops that trap more air for heat insulation. It is the stretchiest thermo lining in ION‘s entire range.

• Silk Stuff

  A silky interior lining ensures a comfortable feel against bare skin. Despite its cozy appearance, it proves to be incredibly durable with its superb flexibility.

• I Foam

  Low density I_Foam with peak heat insulation properties containg a mix of limestone and oyster shell powder.

• Maki Tape 2.0

  Highly elastic neoprene tape reinforces the seams on the lower body and commonly stressed cuff area from the inside.

• Cordlock

  A soft cordlock allows for one-handed adjustment of the front zip flap, featuring a sleek, minimalistic design that you won't even notice.

• Replaceable Draw Cord

  The cord tightens the suit at the shoulder. The high stress on this small component can result in inevitable damage. Now, it can be effortlessly replaced.

• Seam Reinforcement

  All stress points are reinforced and secured by melco tape from the inside to ensure a longer lifespan of the seams.

• Seal Tite

  A narrow rubber strip on the cuffs of the leg and arm ends, as well as on the collar. Ensures a better sealing and prevents the material from leaking.

• Drain Holes

  Prevents water buildup within the wetsuit. The Drain Holes are securely fixed from the inside and do not widen.

• Leg Loops

  Velcro patch to offer the option of attaching the Leg_loops. The loops can be wrapped tightly around the ankle to prevent water from rushing into the suit.

• Key Pocket

  Enjoy the session and stop worrying about your keys – easily store them in the Key_Pocket. Please note: only store water resistant keys in order to avoid any damage.

• Water Barrier

  This silicone application inside the front zip flap reduces the amount of water flushing into the wetsuit.

• One hand zipper

  Open and close your front zip with one hand - it doesn’t get more convenient than this!

• Glued Blind Stitch

  Glued and Blind Stitched wetsuits are first glued and then with a curved needle halfway stitched thru the neoprene to prevent water entering the wetsuit.

• Oystershell Powder

  Biocalcium oxide powder derived from discarded oyster shells is used to partially replace limestone in our neoprene foam formulation. The oyster shell powder is incorporated into the foam compound alongside limestone and Eco Carbon Black.

• Aqua-α™

  Aqua-α™ is a solvent-free, water-based glue. Unlike conventional solvent-based adhesives, it is formulated without added solvents and is used during the lamination process of wetsuit components.

• Dope Dying Yarn

  Dope-dying infuses dye pigments into molten plastic solution to produce coloured yarns without the dyeing process. This saves tremendous amounts of water while reducing energy consumption and water pollution.

• Limestone Neoprene

  Limestone is one of the components used in selected neoprene foam formulations. The foam used in these wetsuits is free from petroleum-based chloroprene rubber.

• Eco-Carbon Black

  Carbon black is one of the components used in neoprene foam formulations. The Eco Carbon Black used in selected ION wetsuits is recovered from scrap rubber tires through pyrolysis and incorporated into the foam compound alongside limestone and Oyster Shell Powder.

Gamme

AMP

Température de l’eau

7°C - 12°C / 45°F - 54°F

Type de néoprène

Double doublure

Fermeture

Zip frontal

Coupe

Coupe universelle

Épaisseur du néoprène

5/4

80% Neoprene / 10% Polyamide / 10% Polyamide (recycled)